3-4. Using the hands-free system (for cellular phone)
Operating the system using voice commands
By following voice guidance instructions output from the speaker, voice
commands enable to the operation of the hands-free phone system with-
out the need to check the display or operate the "TUNE/SEL" knob.
■
Operation procedure when using voice commands
Press the talk switch and follow voice guidance instructions.
■
Auxiliary commands when using voice commands
The following auxiliary commands can be used when operating the
system using a voice command:
"Cancel": Exits the hands-free phone system
"Repeat": Repeats the previous voice guidance instruction
"Go back": Returns to the previous procedure
"Help": Reads aloud the function summary if a help comment is regis-
tered for the selected function
Using the hands-free phone system for the first time
Before using the hands-free phone system, it is necessary to register a
cellular phone in the system. The system will enter phone registration
mode automatically when starting the system with no cellular phone reg-
istered. Follow the procedure below to register (pair) a cellular phone:
Press the off-hook switch or the talk switch.
STEP
1
The introductory guidance and phone name registration instructions are
heard.
486
GX460_U.S.A. (OM60G24U)