2-1. Driving procedures
Turn signal lever
The turn signal lever can be used to show the following intentions of the
driver:
Turn signals can be operated when
■
The "ENGINE START STOP" switch is in IGNITION ON mode.
If the indicators flash faster than usual
■
Check that a light bulb in the front or rear turn signal lights has not burned out.
194
GX460_U.S.A. (OM60G24U)
Right turn
Left turn
Lane change to the right
(push and hold the lever part-
way)
The right hand signals will flash
until you release the lever.
Lane change to the left (push
and hold the lever partway)
The left hand signals will flash
until you release the lever.