Creating A Modular Design; Vertically Joining The Panels - Chauvet Vivid 4 X4 User Manual

Creating a Modular Design

5. Creating a Modular Design

Vertically Joining the Panels

Each Vivid 4 can be easily joined vertically to a truss using an optional rig bar and the 2 female Speego
connections located at the top corners of each panel. Use the male Speego connections at the bottom of
each panel to connect additional panels. These connectors stay recessed when not being used.
Male Speego
Spring Knob
Tightening Latch
Locking Bar
Vivid 4 X4 User Manual Rev. 1 12