DMX Channel Assignments and Values ............36Ch........................COLORband PiX-M USB Zones for DMX Control (36Ch) ........32Ch........................COLORband PiX-M USB Zones for DMX Control (32Ch) ........10 17Ch........................COLORband PiX-M USB Zones for DMX Control (17Ch) ........11 10Ch........................8Ch........................
Page 3
Dimmer Speed Mode ..................Tilt Offset......................IRC-6 Infrared Remote Control ..............IRC-6 Operation ....................Master/Slave Mode (Wired) ................Master/Slave Mode (D-Fi USB)..............5. Maintenance................Product Maintenance ..................6. Technical Specifications ............Returns.................... Contact Us ..................COLORband PiX-M USB User Manual Rev. 1...
Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest version from www.chauvetdj.com.
Keep this User Manual for future use. If you sell the product to someone else, be sure that they also receive this document. COLORband PiX-M USB User Manual Rev. 1 Page 2 of 20...
D-Fi USB Port LED Display Infrared Sensor Fuse Holder Power Out Power In DMX In/Out Product Dimensions 31 in 785 mm 4.8 in 123 mm 2.6 in 67 mm Page 3 of 20 COLORband PiX-M USB User Manual Rev. 1...
Product Additional Products You can power link up to 5 COLORband PiX-M USB products on 120 VAC or up to 9 COLORband PiX-M USB products on 230 VAC. The power linking diagram corresponds to the North American version of the...
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The COLORband PiX-M USB may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming purposes.
Offset OFFS 0–255 Sets offset (calibrates tilt) Configuration (DMX) The COLORband PiX-M USB works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer, which is available from the Chauvet website http://www.chauvetlighting.com/downloads/ DMX_Primer_rev05_WO.pdf. Starting Address When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode uses.
PERATION D-Fi USB Connectivity The PN is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from Chauvet DJ. Simply set the product's DMX Personality and DMX Address, set the DIP switch D-Fi receiving/ transmitting channel, then plug it into the D-Fi USB port.
Blue 9 255 0–100% Red 10 255 0–100% Green 10 255 0–100% Blue 10 255 0–100% COLORband PiX-M USB Zones for DMX Control (36Ch) COLORband PiX-M USB User Manual Rev. 1 Page 8 of 20...
Page 12
101 Dimmer speed mode off Dimmer Speed Mode 152 Dimmer speed mode 1 - fast 203 Dimmer speed mode 2 - medium 255 Dimmer speed mode 3 - slow Page 9 of 20 COLORband PiX-M USB User Manual Rev. 1...
255 0–100% Blue 10 255 0–100% Tilt 255 0–100% Tilt Speed 255 Tilt speed, slow to fast COLORband PiX-M USB Zones for DMX Control (32Ch) COLORband PiX-M USB User Manual Rev. 1 Page 10 of 20...
255 0–100% Blue 5 255 0–100% Tilt 255 0–100% Tilt Speed 255 Tilt speed, slow to fast COLORband PiX-M USB Zones for DMX Control (17Ch) Page 11 of 20 COLORband PiX-M USB User Manual Rev. 1...
DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller. Automatic Programs To run the COLORband PiX-M USB in automatic mode, follow the instructions below: Press <MENU> repeatedly until P-- shows on the display. Press <ENTER>.
Press <ENTER>. Tilt Setting To set a static position of the tilt on the COLORband PiX-M USB, do the following: Press <MENU> repeatedly until t-- shows on the display. Use <UP> or <DOWN> to increase or decrease the tilt value, from t 0–50.
PERATION IRC-6 Infrared Remote Control The COLORband PiX-M USB is compatible with the IRC-6 infrared remote control from Chauvet. To activate IR mode, follow the instructions below: Press <MENU> repeatedly until SEt shows on the display. Press <ENTER> to accept.
Do not connect more than 31 slaves to the master. Master/Slave Mode (D-Fi USB) The D-Fi USB allows a single COLORband PiX-M USB product (the “master”) to control the actions of one or more COLORband PiX-M USB products (the “slaves”) without the need of a DMX controller or DMX cables.
Softly drag any dirt or grime to the outside of the transparent surface. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Page 17 of 20 COLORband PiX-M USB User Manual Rev. 1...
Send the merchandise prepaid, in its original box, and with its original packing and accessories. Chauvet will not issue call tags. Clearly label the package with the RMA number. Chauvet will refuse any product returned without an RMA number. Write the RMA number on a properly affixed label. DO NOT write the RMA number directly on the box.
Outside the U.S., United Kingdom, Ireland, Mexico or Benelux, contact the dealer of record. Follow the instructions to request support or to return a product. Visit our website for contact details. COLORband PiX-M USB User Manual Rev. 1 Page 20 of 20...