ProForm PFTL54806.0 User Manual page 10

10. Attach the ground wire on the Wire Harness (39)
to the indicated hole in the Base (52) with a
Ground Screw (84).
11. Tighten two Belly Pan Screws (20) into the Belly
Pan (66) and the Hood (65). Be careful not to
overtighten the Belly Pan Screws.
12. See the lower drawing. Position the Uprights
(53, 54) so that the treadmill Frame (51) is cen-
tered between the Uprights.
See steps 2, 5, and 6. Firmly tighten the two
Colored Patch Frame Bolts (1) and the four
Upright Bolts (2). Be careful not to overtighten
the Colored Patch Frame Bolts.
With the help of a second person, Carefully
raise the Uprights (53, 54).
10
52
Ground Wire
Hole
11
65
20
12
54
10
39 84
66
20
1
2
51
Top View
51
53