Firmware Updates - Tasty Chips GR-1 User Manual

The GR-1 firmware can be updated via USB. To perform a firmware update, download the
newest version on tastychips.nl and follow the next steps:
Place the zip file in the "root directory" on a USB drive
Place the USB in one of the 4 USB ports on your GR-1
Turn on/restart your GR-1, you will now see a window popping up
Press "select" within 5 seconds to perform the firmware update
The firmware update will now start and takes less than a 30 seconds
Remove the USB disk and restart the GR-1
Keep in mind that when there is a firmware update in the root-directory of a connected USB
drive, the GR-1 will always boot with the "press "Select" to update" window. You might want
to remove the firmware update from the USB drive when the update is done. The actual
firmware version can be found here in configuration menu.

Firmware updates

39