On/Off Switch & Dc Adapter - Tasty Chips GR-1 User Manual

10. On/off switch & DC adapter
The DC adapter can be connected to the DC jack input. The on/off switch turns the whole
GR-1 on or off.
WARNING: Do not use an adapter other than the one that comes with the GR-1.
11. MIDI in & thru
Connect MIDI devices to these DIN connectors. See page 14 for more info about MIDI
connectivity and page 27 for the MIDI cc table.
12. USB connection
The 4 USB ports offer various options:
Connect the MIDI output of one or more MIDI devices to one or more of the 4 USB
ports to control the GR-1 with MIDI
Load samples from one or more USB disks/sticks
Load (copy) and save, presets and performances on one or more USB disks
Perform firmware updates from a USB disk
Connect USB audio interfaces (class compliant) to record audio on the GR-1.
13. CV & Gates
There are 2 CV inputs on the GR-1 which can be routed to different destinations. The gate
output provides a gate signal (5V) when the GR-1 receives one or more note-on messages.
14. Audio output
The GR-1 outputs high quality, low noise, stereo audio on 2 channels, left (L) and right ®.
15. Headphone connection
There is a headphone amplifier on the GR-1. The knob next to the headphone controls the
volume.
14