Patch Mode - Tasty Chips GR-1 User Manual

When you are tweaking knobs and pressing buttons you are making a "patch". You can save,
load and copy a patch. There are 4 banks of 8 overwritable presets that are direct accessible
within a performance.
Saving a patch
To save your patch as a preset, follow the next steps:
1. Press the "patch" button to enter "patch mode", this button will now light up
2. Press the "save" button, you will now enter the save screen
3. Select the desired directory with the "select" knob, (turn the knob)
4. Press save and then name your patch (if you like), see below.
5. Press the "save" button to save
To cancel anytime after step 2, simply press the "Escape" button twice.
Naming
0. The default name will show in the text box
1. Turn Select to choose a character in the name with the red cursor
2. Push Select to edit that character. It will now turn blue to indicate edit mode.
3. Turn to scroll through the alphabet and numbers.
4. Push keep the selected alphanumerical character and go back to character selection
mode.
5. Repeat steps 1..4 until you have written your name
6. Press "save" to confirm you want to use this name
Loading a patch
To load a patch, follow the next steps:
1. Select the preset to load the desired patch on, using the bank and preset buttons
2. Press the "patch" button to enter "patch mode", this button will now light up
3. Press the "load" button, you will now enter the load screen
4. Select the desired directory and patch with the "select" knob, (turn and press the
knob)
To cancel after step 2, simply press the "Escape" button twice.
Copy a patch
To copy the current patch to another preset, follow the next steps:
1. Press the "patch" button to enter "patch mode", this button will now light up
2. Press the "copy" button, the copy button will now blink
3. Select the preset to copy the desired patch to, using the bank and preset buttons
4. Press the "copy" button, the copy button will now blink
To cancel after step 2, simply press the "Escape" button twice.

Patch mode

19