Sample Mode - Tasty Chips GR-1 User Manual

It is possible to record and process (real time) incoming audio. Recorded audio can be saved
as a sample.
Audio input
There is no audio input on the GR-1 itself, but it was a reached (Kickstarter) stretch goal to
add real time audio recording by the use of USB dongles/class compliant audio interfaces.
Configuration
To enter the Sample configuration press "shift" and then "Sample". The configuration
parameters can be set with the select knob. Leave this configurations screen with "Escape".
Looping rec
With "looping rec" turned off, the recording of the sample will be a one shot recording. Turn
"looping rec" on to do continuous recording/real-time processing.
Record start mode
You can turn on the ability to record here and select the start point for recording. The
following start points are available:
• Current position: When pausing the recording, recording will start from that same
point when activated again
• Wiper: Recording starts from the sample position, when activated
• Start: Recording starts from 0.0s, when activated
Sample size
The sample size or "recording duration" (in seconds) can be set here. This will take effect
when sample is cleared. See below.
Clear sample
Select and turn to create a new sample with the number of seconds set with "Sample size".
If you did this accidentally, this can be undone by changing to another preset and back again.

Sample mode

26