Lfo Section - Tasty Chips GR-1 User Manual

5. LFO section

The GR-1 has 2 assignable Low Frequency Oscillators (LFO's). The LFO's can produce 2
different waveforms as modulating signal for different parameters. The controls of the LFO's
from top to bottom:
Frequency:
Amount:
Wave:
Dest:
Read more about the LFO controls and options in chapter "LFO's" on page 24.
6. Modes & more
There are 3 modes on the GR-1:
Sample
Patch
Performance
These modes can be selected with the buttons "Sample", "Patch" and "Perf". Read more
about these modes in the corresponding chapters.
Play
The GR-1 has a "play" button. The play button triggers 1 single voice and makes it possible to
use the GR-1 standalone. Read more about the play function in the Quick start guide.
Load, save and copy
The GR-1 is able to load, save and copy patches and performances. The load, save and copy
functions are explained in different sections of this manual. Please read this manual.
Shift
When active, the shift button, allows buttons and knobs to have different functions. The
shift button gives access to parameters that don't have to be direct accessible.
controls the speed of the modulating signal
controls the amount of modulation
selects the waveform of the modulation signal
selects the destination parameter to modulate
12