Loading Originals; Placing Originals On The Platen - Kyocera FS-3640MFP Operation Manual

Common Operations > Loading Originals

Loading Originals

Placing Originals on the Platen

You may place books or magazines on the platen in addition to ordinary sheet originals.
NOTE
Before opening the document processor, be sure that there are no originals left on the original table or on the original
eject table. Originals left on the original table or on the original eject table may fall off when the document processor is
opened.
Shadows may be produced around the edges and in the middle of open-faced originals.
Align it flush against the
original size indicator plates
with the back left corner as
the reference point.
Open the original cover or document processor, and place the original.
Do not push the original cover forcefully when you close it. Excessive pressure may
crack the platen glass.
When placing books or magazines on the machine, do so with the document
processor or original cover in the open position.
CAUTION
Do not leave the document processor open as there is a danger of personal injury.
IMPORTANT
3-12
Put the scanning
side facedown.