Clearing Paper Jams; Paper Jam Location - Kyocera FS-3640MFP Operation Manual

Troubleshooting > Clearing Paper Jams

Clearing Paper Jams

If a paper jam occurs, the touch panel will display Paper jam. and the machine will stop. Refer to these procedures to
remove the jammed paper.
How to read the screen
Displays the processing
method.
[< Back]
[Next >]
[Hold]

Paper Jam Location

Detailed paper jam positions are as follows. Refer to the indicated page number to remove the paper jam.
5
Precautions with Paper Jams
• Do not reuse jammed papers.
• If the paper tears during removal, be sure to remove any loose scraps of paper from inside the machine.
• Scraps of paper left in the machine could cause subsequent jamming.
CAUTION
The fixing unit is extremely hot. Take sufficient care when working in this area, as there is a danger of
getting burned.
Downloaded from www.Manualslib.com
Paper jam.
JAM 0010
Returns to the previous step.
Advances to the next step.
Puts the current step on hold, and switchs to the Status screen. The status of jobs can be checked.
(Refer to Checking Job Status on page 8-2.)
6
1
2
3
1
4
4
3
2 5
6
2
2
2
manuals search engine
Open cassette 1 and
remove paper.
Set cassette 1.
Paper Jam
Location
Clear the paper jammed in the multi purpose
tray.
Clear the paper jammed in cassette.
Clear the paper jammed in duplexer.
Clear the paper jammed inside the machine.
Clear the paper jammed in the rear unit.
Clear the paper jammed in the document
processor.
10-22
10:10
Displays the current
step.
Description Reference
Page
10-23
10-23
10-24
10-25
10-26
10-26