Operation Panel - Citizen CLP-621 Technical Manual

2-3. Operation Panel

2-3. Operation Panel
Operation panel is located on the left/front side of the printer.
Operation panel consists of 4 keys and 4 LEDs, which perform to set the condition of the printer
and indicate the operating condition.
2-3-1. External view
(1) Keys
There are 4 keys, [MODE/REPEAT], [PAUSE], [FEED] and [STOP]. The function name on the
key is selected when the key is pressed.
(2) LEDs
There are 4 LEDs, POWER, PRINT, CONDITION and ERROR. The LEDs light up or blink to
indicate printer status, setting modes, or error conditions.
POWER LED lights up when power is turned on. (green)
PRINT LED lights up when the printer is ready to print (on-line state). (green) It is also used in
Menu Setting mode and Sensor Adjustment mode.
CONDITION LED lights up in Menu Setting mode or Sensor Adjustment mode. (orange)
ERROR LED lights or blinks when error occurs. (red)
(To indicate an error, PRINT and CONDITION LEDs will be also used.)
POWER
PRINT
CONDITION
ERROR
PAUSE FEED
STOP
MODE/REPEAT
2-35
2-3. Operation Panel
CLP-621 & CLP-631