Table of Contents
Advertisement
Before Operation (Continued)
Disc Finalize
Finalizing 'fixes' the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen for
navigating the disc. This is accessed by pressing DISC
MENU or TITLE.
Caution
• Once you've finalized a disc recording, you can't
edit or record anything else on that disc. You can
record and edit on this recorder after unfinalizing.
DISC Initialize
DISC Finalize
DISC Name
DISC Protect
PBC
1 1
Follow steps 1-3 as shown on page 24 (DISC
Initialize).
2 2
Use v / V to select the Disc Finalize option.
3 3
Press B to move to the third level.
Finalize is highlighted.
4 4
Press ENTER.
Finalize menu appears.
Finalize
Do you want finalization?
Ok
5 5
Select Ok then press ENTER.
The recorder starts finalizing the disc.
ote
How long finalization takes depends on the type of disc,
how much is recorded on the disc, and the number of
titles on the disc. A disc recorded can take up to 3-4
minutes to finalize.
ip
If you load a DVD-RW that has already been finalized
on a different DVD Recorder, you can 'unfinalize' it by
choosing Unfinalize from the Finalize menu. After doing
this, you can edit and re-record onto the disc.
Finalize
Unfinalize
Prev.
Select
Cancel
Disc Protect
When recording in VR mode, set to ON to prevent acci-
dental recording, editing or erasing of the disc loaded. If
you need to unlock the disc to make edits, select OFF.
DISC Initialize
DISC Finalize
DISC Name
DISC Protect
PBC
PBC
The PBC setting can be changed. Set Playback Control
(PBC) to ON or OFF.
- ON: Video CDs with PBC are played according to the
PBC.
- OFF: Video CDs with PBC are played the same way as
Audio CDs.
DISC Initialize
DISC Finalize
DISC Name
DISC Protect
PBC
OFF
ON
Prev.
Select
OFF
ON
Prev.
Select
25
Advertisement
Table of Contents
Troubleshooting
