Connections - Zenith RC59000M Installation And Operating Manual

Connections (Continued)
Accessory Audio/Video (A/V)
Connections to VCR/DVD Recorder
Connect the AV 1 or AV 2 jacks on the VCR/DVD
Recorder to the audio/video out jacks on your accesso-
ry component, using optional audio/video cables.
ote
If you use the S-V INPUT jack on the front panel, the
signal of VIDEO OUT jack on the front panel is not out-
put.
Jack panel of Accessory Component
(VCR, Camcorder, etc.)
Rear of
VCR/DVD Recorder
S-VIDEO
OUTPUT
AUDIO
OUTPUT
R
OR
L
VIDEO
OUTPUT
OR
Front of
VCR/DVD Recorder
Connecting a Digital Camcorder
Using the front panel DV IN jack, it is possible to con-
nect a DV digital camcorder or video deck or
DVD-R/RW recorder and digitally transfer DV tapes or
DVD-R/RW discs to DVD-R/RW.
Use a DV cable (not supplied) to connect the DV in/out
jack of your DV camcorder/video deck to the front panel
DV IN jack of this recorder.
ote
This jack is for connection to DV equipment only. It is
not compatible with digital satellite tuners or D-VHS
video decks.
DV Digital Camcorder
DV
IN/OUT
Front of VCR/DVD Recorder
17