Progressive Scan - Zenith RC59000M Installation And Operating Manual

Before Operation (Continued)
TV Aspect Ratio
4:3 Letter Box: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Pan Scan: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
16:9 Wide: Select when a 16:9 wide TV is connected.
Tuning Band
Auto channel Set
CH. Add/Del
Clock
TV Aspect Ratio

Progressive Scan

Factory Setting
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT jacks,
but are connecting the VCR/DVD Recorder to a stan-
dard (analog) television, set Progressive Scan to OFF.
If you are using the COMPONENT VIDEO OUT jacks
for connection to a TV or monitor that is compatible with
a progressive scan signal, set Progressive Scan to ON.
Tuning Band
Auto channel Set
CH. Add/Del
Clock
TV Aspect Ratio
Progressive Scan
Factory Setting
Caution
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to ON in error, you must reset the unit. First, remove the
disc in the VCR/DVD Recorder. Next, press STOP (x)
again and hold it for five seconds before releasing it.
The video output will be restored to the standard set-
ting, and a picture will once again be visible on a con-
ventional analog TV or monitor.
20
Factory Setting
If you need to, you can reset the recorder to all its
factory settings. Select "SET" then press ENTER.
Once the setting for Factory Setting is entered, Initialize
menu appears. Use b B button to select "Yes" and
press ENTER.
Some options can not be reset. (Movie Rating, Password,
Country Code, Display Menu, and Progressive Scan)
4:3 Letter Box
4:3 Pan Scan
16:9 Wide
Prev. Select
Language
Display Menu
Select a language for the Setup menu and on-screen
display.
OFF
ON
Prev. Select
Disc Language
Select a language for the disc's Menu, Audio, and Subtitle.
Original : The original language set for the disc is selected.
Other : To select another language, select Other option then
press ENTER. Use the numbered and ENTER buttons to key-
in the corresponding 4-digit number according to the language
code list on
press b repeatedly to delete one by one and correct it.
ote
Tuning Band
Auto channel Set
CH. Add/Del
Clock
TV Aspect Ratio
Progressive Scan
Factory Setting
Display Menu
Disc Menu
Disc Audio
Disc Subtitle
page 50. If you a mistake before pressing ENTER,
Display Menu
Disc Menu
Disc Audio
Disc Subtitle
SET
Prev. Select
English
Espa ol
Select
Prev.
Original
English
French
Spanish
Italian
Japanese
Chinese
Other - - - -
Prev. Select