Table of Contents
Advertisement
ASSEMBLY
To hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480.
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included hex keys, assembly requires a Phillips screwdriver
wrench
, and a rubber mallet
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number follow-
ing the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre-assem-
bled. If a part is not in the parts bag, check to see if it has been pre-assembled.
Star Washer
M4 x 13mm
(100)–3
Washer (93)–2
M10 x 20mm x
M10 x 20mm x
1mm Washer
1.5mm Washer
(81)–2
(84)–2
M4 x 16mm
Self-tapping
Screw (79)–10
M8 x 16mm Button
Screw (95)–3
M10 x 62mm Bolt (89)–4
M6 Split
Washer (88)–8
M10 x 20mm x
2mm Washer
(92)–4
M4 x 16mm
Screw (86)–4
M8 x 48mm Button
Screw (78)–2
.
M8 Split
Washer (72)–2
M10 x 25mm
Washer (94)–4
M6 x 35mm Phillips
Screw (87)–8
M10 x 20mm Button
Screw (91)–4
M10 x 78mm Button Screw (90)–2
5
, an adjustable
M10 Spacer
Wave Washer
(76)–2
(98)–8
M8 Nylon
M10 Nylon
Locknut (96)–4
Locknut (97)–2
M8 x 42mm Bolt
(71)–4
M10 x 23mm Shoulder
Screw (80)–8
Advertisement
Table of Contents
