Display Messages - Mercedes-Benz C-Class Manual

Confirm by pressing a on the steering
X
wheel.
Press : or 9 to select the
X
ment Cluster submenu.
Press a to confirm.
X
Press : or 9 to select the
X
Display function.

Display messages

Hybrid drive system
Display messages
d
Vehicle Operational
Switch the Ignition
Off Before Exiting
Change the current
drive program
before changing the
operating mode. or
Exit manual drive
program M before
changing the operat‐
ing mode.
E-MODE Currently
Unavailable
Instru‐
Permanent
Possible causes/consequences and M Solutions
You are exiting the vehicle when it is in a ready-to-drive state. The
õ indicator in the multifunction display is on. A warning tone also
sounds.
If you leave the vehicle:
Secure the vehicle against rolling away (see the vehicle Operator's
X
Manual).
Switch off the ignition and remove the SmartKey.
X
If you do not leave the vehicle:
Switch off the electrical consumers, e.g. automatic climate control,
X
seat heating.
Please note the following: the electrical consumers are supplied by the
12 V battery. If the vehicle is left in a ready-to-drive state for an exten-
ded period, it will switch off once the 12 V battery is almost empty. It
will then only be possible to start the vehicle using a second battery
(jump-starting).
You have attempted to change the operating mode in the automatic
drive program S (Sport), S+ (Sport Plus) or in the manual drive pro-
gram M.
Activate drive program C (Comfort) or E (Economy) (
X
Select the preferred operating mode HYBRID, E-MODE, E-SAVE or
X
CHARGE ( page 22).
Y
The condition of charge of the high-voltage battery has dropped to the
lower limit and the E-MODE operating mode has been switched off.
Driving with the internal combustion engine is activated and the oper-
ating mode switches to the basic HYBRID setting.
Continue driving using the internal combustion engine.
X
You can switch to the E-SAVE or CHARGE operating mode as
required ( page 22).
Y
If you select CHARGE, the high-voltage battery is charged.
Once the condition of charge display for the high-voltage battery
has increased slightly, you can switch to the E-MODE operating
mode again.
Display messages
Press a to confirm.
X
The current setting Outside Temperature
or Speedometer [km/h]
To change the setting: press a again.
X
45
appears.
page 23).
Y
Z