Table of Contents
Advertisement
ASSEMBLY
To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included tools, assembly requires a Phillips screwdriver
wrenches
, a rubber mallet
Use the drawings below to identify the small parts required for assembly. The number in parentheses below
each drawing is the key number of the part, from the PART LIST near the end of this manual. The number fol-
lowing the key number is the quantity needed for assembly. Note: Some small parts may have been pre-
assembled. If a part is not in the hardware kit, check to see if it has been preassembled.
M6 Washer
M8 Split
(64)–2
Washer (130)–4
M4 x 12mm
M6 x 16mm Patch
Round Head
Screw (76)–4
Screw (96)–1
M8 x 44mm Button Screw (84)–8
M8 x 38mm Button Bolt
(105)–2
, and pliers
7.6mm Spacer
M10 Split
(109)–2
Washer (73)–2
M8 x 54mm Button Screw (83)–4
M8 x 79mm Bolt Set (65)–2
M10 x 108mm Button Screw (70)–2
5
, two adjustable
.
M8 Jam Nut
M4 x 16mm
(86)–6
Screw (98)–4
M8 x 42mm Button
Bolt (85)–4
Advertisement
Table of Contents
