Rear View; Fuse; Iec Inlet - Peavey VYPYR 15 User Handbook Manual

Rear View

0 1

0. Fuse

The fuse is located within the cap of the fuseholder. If the fuse fails, THE FUSE MUST BE RE-
PLACED WITH THE SAME TYPE AND VALUE IN ORDER TO AVOID DAMAGE TO THE
EQUIPMENT AND TO PREVENT VOIDING THE WARRANTY. If the unit repeatedly blows the
fuse, it should be taken to a qualified service center for repair.

1. IEC Inlet

U.S. Domestic AC Mains Cord
The mains cord supplied with the unit is a heavy-duty, three conductor type with a conventional
120VAC plug with ground pin. If the outlet used does not have a ground pin, a suitable adapter should
be used and the third wire grounded properly. All apparatus with class 1 construction shall be con-
nected to a mains socket with a protective earthing connection.
Never break off the grounding pin on any equipment. It is provided for your safety. The use of exten-
sion cords should be avoided but, if necessary, always use a three wire type with at least #14 AWG
wire size. Always use a qualified electrician to install any electrical equipment. To prevent the risk of
shock or fire hazard, always be sure the amplifier and all associated equipment is properly grounded.
NOTE: For UK Only
If the colors of the wires in the mains lead of this unit do not correspond with the colored markings
identifing the terminals in your plug, proceed as follows: (1) The wire that is colored green and yel-
low must be connected to the terminal that is marked by the letter E, the earth symbol, colored green
or green and yellow. (2) The wire that is colored blue must be connected to the terminal that is marked
with the letter N or the color black. (3) The wire that is colored brown must be connected to the termi-
nal that is marked with the letter L or the color red.