Advertisement
1
15
KB-75 150.indd
5
REAR PANEL
2
14
3
AC VOLTAGE SELECTOR SWITCH (1)
Before plugging in the power cord, check to see that the unit is set for the proper voltage for
your area 115V ~ (60Hz) or 230V ~(50Hz). A cover plate is provided to ensure that this switch
is not accidently reset or tampered with between uses.
Main Line Out (2)
These low-noise‚ electronically balanced XLR connectors can be used to route signals to a mixing
console‚ recording device‚ etc.
Send/Return Jacks Mains (3 & 4)
Two stereo pairs of 1/4" jacks allows the use of various auxiliary units (effects units‚ equalizers‚
etc.) in-line‚ before the power amp section.
Headphone Jack (5)
This 1/4" jack accepts stereo headphones only.
CH5/Monitor Input Jack (6)
Use this 1/4" jack to connect to the output of any line-level device.
Channel 4 (Channel 3 input on KB-75) High-Impedance Input (7)
This pair of 1/4" jacks accepts high-impedance microphones or line-level sources equipped with
left and right 1/4" phone plugs.
5
6
7
11
4
9
8
10
12
13
2009-6-24
16:42:38
Advertisement
