Restore Factory Default Settings - Peavey VYPYR 15 User Handbook Manual

Engineer`s Notes

Restore Factory Default Settings

To restore your amplifier to factory default settings (THIS PROCESS WILL ERASE ANY PRESETS
YOU MAY HAVE STORED) turn the amplifier off, press and hold preset buttons 1 and 2 simultaneously
and turn the amp back on. After a moment the LEDs will return indicating the amplifier has been reset.
STOMP P1
xR Wild Level
x Boost Level
Fuzz Level
BC Chorus Speed
Squeeze Level
Ring Modulator Freq
Auto Wah Speed
Analog Flange Speed
MOG Octave Up
Analog Phase Speed
TubeScrm Level
EFFECT P1
Octaver Mix
Phaser Speed
Rotary Spkr Speed
Reverse Time
Pitch Shifter Interval
Flanger Speed
Slap Back Time
Env Filter Sensitivity
Chorus Speed
Tremolo Speed
P2 Notes
Drive
Tone knob set to 12
Drive
Drive
Russian model, tone at
Depth
Filters set to 12
Sensitivity
Mix
Modulation frequency from 80 hz to 2Khz
Depth
At min Depth, Param1 serves as fixed
Depth
Depth combines Width and Regen of original pedal
Octave Down
Level controls
Depth
Depth adds regeneration for more intensity
Drive
Tone knob at 12
P2 Notes
Octave
Depth
8 stage phaser
Depth
Mix
Max Mix = 0/100 Dry/Wet, 250ms<T<1s
Mix
At Minimum Mix, Param1 controls Detune
Depth
DelayLine=7ms
Mix
Max Mix = 50/50 Dry/Wet, 50ms<T<167ms
Intensity (Q)
Depth
DelayLine=15ms
Depth
Period from 2 s to .2 s
o'clock
, 12dB more gain than pedal
o'clock
, 10dB more gain potential
o'clock
, flat
o'clock
, 12dB more gain than pedal at max