Ricoh SP C360DNW User Manual page 84

4. Troubleshooting
Problem
The printed image is different
from the image on the
computer's display.
The image is too dark or too
light.
The image is too dark or too
light.
Image is dirty.
Vertical streaks appear on the
printed page.
Black or white streaks appear
on the printed page.
82
Cause
Printing will be performed by
the printer's graphic processing
function.
The paper type settings are not
configured correctly.
The paper is loaded reverse
side up. Printing on non-print
surfaces reduces print quality
and can damage the printer's
internal components.
Use of non-recommended toner
can result in a loss of print
quality and other problems.
The LED heads or intermediate
transfer unit is dirty.
The LED heads is dirty.
Solution
PCL 6:
On the printer driver's [Detailed
Settings] tab, click [Print
Quality:Advanced] in "Menu:",
and then select [Raster] in the
"Vector/Raster:" list.
Check that the paper loaded on
the paper tray or bypass tray
matches the paper type set on
the display panel. For details
about paper type settings, see
page 46 "Paper Settings".
Before printing on special paper,
check its surface carefully. For
details about special paper, see
page 54 "Paper Precautions".
Use genuine manufacturer toner.
Contact your service
representative.
• Clean the LED heads. For
details, see "Cleaning the
LED Heads", Operating
Instructions.
• Perform the [Cleaning]
menu from the control
panel. If the problem
persists, contact your sales
or service representative.
For details about
[Cleaning], see "Quality
Maintenance", Operating
Instructions.
Clean the LED heads. For details,
see "Cleaning the LED Heads",
Operating Instructions.