Ricoh SP C360DNW User Manual page 74

4. Troubleshooting
Message
"Paper size/type mismatch." The printer driver settings are
"Printer Font Error"
"Problem: Wireless Board"
"Remove the paper from
Standard Tray."
"ReplRqrd:Drum Unit: Black" You need to replace the black
"ReplRqrd:Drum Unit: Color" You need to replace the color
"USB has a problem."
72
Cause
incorrect or the tray does not
contain paper of the size or type
selected in the printer driver.
An error has occurred in the font
settings.
An error has occurred in the
wireless LAN.
The standard tray is full.
drum unit.
drum unit.
An error has occurred in the USB
interface.
Solution
• Check that the printer driver
settings are correct, and then
load paper of the size
selected in the printer driver
into the input tray. For details
about how to load paper,
see page 25 "Loading
Paper".
• Select the tray manually to
continue printing, or cancel
a print job. For details about
how to select the tray
manually, or cancel a print
job, see "If an Error Occurs
with the Specified Paper Size
and Type", Operating
Instructions.
Contact your service
representative.
Turn off the main power switch. If
the message appears again,
contact your service
representative.
Remove the paper.
For details, see "Replacing Other
Consumables", Operating
Instructions.
For details, see "Replacing Other
Consumables", Operating
Instructions.
Turn the main power switch off
and then back on again. If the
message appears again, contact
your service representative.