Ricoh SP C360DNW User Manual page 76

4. Troubleshooting
Message
"I/O buffer overflow."
"Insufficient Memory"
"Paper Size Error"
"Paper Type Error"
"PDL File error."
74
Cause
An input buffer overflow occurred.
A memory allocation error
occurred.
Job Reset is automatically
performed if the specified paper
size is incorrect.
The printer does not recognize the
paper type specified using the
printer driver.
The printer language error
occurred.
Solution
• In [I/O Buffer] under the
[Host Interface] menu, set the
maximum buffer size to a
larger value.
• Reduce the number of files
being sent to the printer.
PCL 5/PostScript 3:
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
PCL 6:
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
On the printer driver's [Detailed
Settings] tab, click [Print
Quality:Advanced] in "Menu:",
and then select [Raster] in the
"Vector/Raster:" list. In some
cases, it will take a long time to
complete a print job.
Specify the correct paper size,
and then print the file again.
Check that the printer is
connected to the network
correctly and bidirectional
communication is enabled. If the
problem persists, confirm the user
paper type settings of the printer.
Press [OK].