Notes On The Documentation - Vaillant ecoTEC plus 806 VU GB 806/5-5 Installation And Maintenance Instructions Manual

2

Notes on the documentation

2.1 Observing other applicable documents
▶
You must observe all the operating and installation in-
structions included with the system components.
2.2 Storing documents
▶
Pass these instructions and all other applicable docu-
ments on to the system operator.
2.3 Applicability of the instructions
These instructions apply only to:
Product article number
806 (VU GB 806/5‑5)
1006 (VU GB 1006/5‑5)
1206 (VU GB 1206/5‑5)
2.4 Benchmark
Vaillant is a licensed member of the Benchmark Scheme.
Benchmark places responsibilities on both manufacturers
and installers. The purpose is to ensure that customers are
provided with the correct equipment for their needs, that it is
installed, commissioned and serviced in accordance with the
manufacturer's instructions by a competent person approved
at the time by the Health and Safety Executive and that it
meets the requirements of the appropriate Building Regu-
lations. The Benchmark Checklist can be used to demon-
strate compliance with Building Regulations and should be
provided to the customer for future reference.
Installers are required to carry out installation, commission-
ing and servicing work in accordance with the Benchmark
Code of Practice which is available from the Heating and
Hotwater Industry Council who manage and promote the
Scheme.
Benchmark is managed and promoted by the Heating and
Hotwater Industry Council.
For more information visit www.centralheating.co.uk
0020134823_04 ecoTEC plus Installation and maintenance instructions
Article num- Gas Council
ber Number
0010010767 41-044-68
0010010780 41-044-69
0010010791 41-044-70
Notes on the documentation 2
3 Product description
3.1 Design of the product
3.1.1 Functional elements (806/5‑5)
16
15
14
13
12
11
10
9
1 Connection for the flue
pipe
2 Fan
3 Gas valve
4 Connection for air in-
take pipe
5 Flue gas pressure
cartridge
6 Return temperature
sensor
7 Water pressure sensor
1
2
3
4
5
6
7
8
8 Electronics box
9 Integrated condensation
heat exchanger
10 Pressure gauge
11 Flow temperature
sensor
12 Safety overheat cut-off
device
13 Ignition electrode
14 Automatic air vent
15 Monitoring electrode
7