Notes On The Documentation; Observing Other Applicable Documents; Storing Documents; Validity Of The Instructions - Vaillant ecoFIT pure 412 Installation And Maintenance Instructions Manual

2 Notes on the documentation

2 Notes on the documentation
2.1

Observing other applicable documents

▶
You must observe all the operating and installation in-
structions included with the system components.
2.2

Storing documents

▶
Pass these instructions and all other applicable docu-
ments on to the system operator.
2.3

Validity of the instructions

These instructions apply only to:
Product article number
Article number
VU 126/6-3 OV (H-GB) 0010020400
ecoFIT pure 412
VU 156/6-3 OV (H-GB)
0010020401
ecoFIT pure 415
VU 186/6-3 OV (H-GB) 0010020402
ecoFIT pure 418
VU 256/6-3 OV (H-GB)
0010020403
ecoFIT pure 425
VU 306/6-3 OV (H-GB) 0010020404
ecoFIT pure 430
VU 356/6-3 OV (H-GB) 0010020405
ecoFIT pure 435
3

Product description

3.1

Benchmark

Vaillant is a licensed member of the Benchmark Scheme.
Benchmark places responsibilities on both manufacturers
and installers. The purpose is to ensure that customers are
provided with the correct equipment for their needs, that it is
installed, commissioned and serviced in accordance with the
manufacturer's instructions by a competent person approved
at the time by the Health and Safety Executive and that it
meets the requirements of the appropriate Building Regu-
lations. The Benchmark Checklist can be used to demon-
strate compliance with Building Regulations and should be
provided to the customer for future reference.
Installers are required to carry out installation, commission-
ing and servicing work in accordance with the Benchmark
Code of Practice which is available from the Heating and
Hotwater Industry Council who manage and promote the
Scheme.
Benchmark is managed and promoted by the Heating and
Hotwater Industry Council.
For more information visit www.centralheating.co.uk
6
3.2
The boilers are very high efficiency appliances.
As a consequence the heat loss from the appliance casing
during operation is very low.
Compartment ventilation is not required as the products are
only certified, and can only be fitted with a concentric flue
system.
3.3
The identification plate is mounted on the underside of the
product in the factory.
The identification plate keeps record of the country in which
the product is to be installed.
Gas Council
Information on the
Number
identification plate
41-694-08
41-694-09
Serial number
41-694-10
41-694-11
41-694-12
41-694-19
ecoFIT pure
2H, G20 – 2 kPa
(20 mbar)
Cat.
Condensing techno-
logy
Type: Xx3(x)
PMS
PMW
V/Hz
W
IP
Pn
Pnc
P
Qn
Qnw
T
max.
NOx
Code (DSN)
GC no.
Installation and maintenance instructions ecoFIT pure 0020230535_05

Compartment Ventilation

Information on the identification plate

Meaning
Barcode with serial number
For quality control purposes; 3rd and 4th
digits = year of production
For quality control purposes; 5th and 6th
digits = week of production
For identification purposes; 7th to 16th
digits = product article number
For quality control purposes; 17th to 20th
digits = place of manufacture
Product designation
Factory setting for type of gas and gas
connection pressure
Unit category
Efficiency class of the boiler in accord-
ance with EC Directive 92/42/EEC
Permissible flue gas connections
Maximum water pressure in heating
mode
Maximum water pressure in hot water
handling mode
Electrical connection
Max. electrical power consumption
Level of protection
Heating mode
Nominal heat output range in heating
mode
Nominal heat output range in heating
mode (condensing technology)
Nominal heat output range in hot water
handling mode
Nominal heating load range in heating
mode
Nominal heating load range in hot water
handling mode
Max. flow temperature
NOx class for the product
Specific product code
Read the instructions.
Gas council number