Showing The Mac Addresses Of A Specific Service Instance - Cisco NCS 4200 Series Configuration Manual

Configuring MAC Address Security on Service Instances and EVC Port Channels
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 show ethernet service instance mac security address
Example:
Device# show ethernet service instance mac
security address
Step 3
show mac address-table secure
Example:
Device# show mac address-table secure
Step 4 end
Example:
Device# end

Showing the MAC Addresses of a Specific Service Instance

SUMMARY STEPS
1. enable
2. show ethernet service instance id id interface type number mac security address
3. end
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Showing the MAC Addresses of a Specific Service Instance
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Displays the secured addresses on all the service
instances.
Displays the secure MAC address on the service
instances.
Returns to user EXEC mode.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Layer 2 Configuration Guide for Cisco NCS 4200 Series
61