Removing The Vr Heat Sink - Dell XPS 8930 Service Manual

Removing the VR heat sink

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
WARNING: The heat sink may become hot during normal operation. Allow
sufficient time for the heat sink to cool before you touch it.
CAUTION: For maximum cooling of the processor, do not touch the heat
transfer areas on the heat sink. The oils in your skin can reduce the heat
transfer capability of the thermal grease.
Prerequisites
1 Remove the right-side
2 Follow the procedure from step 1 to step 2 in
3 Remove the blower and heat-sink
Procedure
1 Loosen the captive screws that secure the VR heat sink to the system board.
90
computer. After working inside your computer, follow
After working inside your
cover.
assembly.
computer. For more safety best
www.dell.com/
"Removing the power-supply
Before
unit".