Changing The Hand Rim For One—Arm Drive - Invacare Rea Dahlia 30 Service Manual

2.27 Changing the hand rim for one—arm drive
1.
A
Loosen the three screws A and remove the hand rim.
2. Turn the hand rim around in order to increase/decrease
the distance between the handrims.
1572308-G
3. Re-mount the turned hand rim.
4. Tighten the screws A tightly again.
5 mm Allen key
WARNING!
Risk of injury
– Be careful if you remove the telescopic
rearwheel shaft. Point it away from your body
when you release the steel spring inside.
Assembly
23