Exchanging Subscriber Cards - Samsung SMG-3000 Installation Manual

6–1
Chapter 6 SMG-3000 System
Maintenance and Repair
You should refer to the DCS Gateway Installation Manual and DCS Gateway Maintenance Manual supplied
on the Gateway CD-ROM to carry out routine maintenance and repair on your SMG-3000. The Installation
Manual includes procedures for exchanging cards in the system rack (see Exchanging Boards in Chapter 7).
If you want to exchange subscriber cards using the BDR cable, follow the instructions given in the manual
but take note of the following.

Exchanging Subscriber Cards

The BDR connector for attaching the BDR cable when exchanging subscriber cards is located on the back-
plane board of the SMG-3000 system as shown below.
BDR connector
BDR cable