Advertisement
Activating a PDP Context:
To activate a PDP context, perform the following:
•
Do not modify the CID field unless you need to set up a specific ID for one of your devices. Leaving it
blank will allow the software to automatically choose the next CID available.
•
Leave the IP address field unchanged unless you need to set up a connection for another TE.
•
The APN is read from the USIM card and is usually not changed unless you have more than one APN
provisioned on the USIM card.
•
Next, select the QoS that is needed by selecting it from the drop-down list.
•
If your service provider requires a UN and PW, enter it in the Username and Password boxes. Then click
Apply.
•
The new connection will be displayed as shown below.
16
Background context activated for 192.168.128.101
Hughes 9350 BGAN Terminal User Guide
Advertisement
