Charging Devices Using The Usb Ports; Using The Speaker (Mono) With A Bluetooth Audio Source - Altec Lansing timeMachine IMW465 Owner's Manual

Charging Devices Using the USB Ports

This speaker can be used to charge devices typically charged through a computer's USB port. To do so, follow
the steps below.
1. Connect the standard size end of a USB cable (not included) to the USB Port on back of the unit and
connect the other end to the charging port on your device.
2. Monitor the charging on your device. Some devices use a proprietary charging method and will not charge
using the USB Port. If this happens, you must charge your device using the charger that came with it.
NOTE: Your speaker must be plugged in to a working outlet in order to charge devices
Using Your IMW465 Speaker (Mono) with a Bluetooth Audio Source
You can use this speaker to listen to audio wirelessly from devices such as smart phones, iPods, tablets and
most other Bluetooth sound sources.
1. Press the POWER button to power on your speaker.
2. Press the MODE button repeatedly until the bt icon appears on the display screen. You will audibly hear
your speaker say, "You are now pairing." LED will start blinking Blue. Now you are ready to pair your Bluetooth
device with your IMW465 speaker.
NOTES
-If you see the LED blinks Green instead of Blue. Press and hold the "TWS" button on the rear cabinet for 1
second to change the Bluetooth mode until the "bt" appears on the display and you hear "You are now pairing."
Also LED will start blink BLUE. Now you can ready to pair your device with IMW465.