To Disconnect Your Bluetooth Device; Reconnecting Your Device; Out Of Range Or Lost Signal; To Avoid A Lost Connection - Altec Lansing timeMachine IMW465 Owner's Manual

3, Follow the instruction of your phone or other Bluetooth device to pair the unit.
a) Go to the Bluetooth Manager of your Bluetooth device.
b) Search Bluetooth devices and select "IMW465" to start connecting.
c) Enter "0000" if your device asks for a PIN code.
d) Once paired, the unit will beep and the Bluetooth icon on the LCD will turn on steady.
e) Although the unit can only stream audio from one device at a time.
When there is an incoming call:
1. Press the PRESET button to pick up the call.

To Disconnect Your Bluetooth Device

Turn off the connected device or press and hold "Play/ Pause" button to disconnect and refresh the connection
of Bluetooth device.

Reconnecting Your Device

To regain Single speaker mode, press "Play/ Pause" button for 3 seconds on the speaker, wait approximately
15 seconds. The "IMW465" speaker will automatically reconnect to previously connected your phone or
Bluetooth device. If you move out of range or turn off the Bluetooth feature on your device, the unit will
disconnect from your device. To reconnect, simply access the Bluetooth Manager on your device and select
IMW465.

Out of Range or Lost Signal

If your Bluetooth device is out of range (beyond 30 feet) of your speaker or if there is something blocking the
Bluetooth signal, the Bluetooth connection with the Bluetooth device may be lost.

To avoid a lost connection:

1. Move the Bluetooth device back into range of your speaker (within 30 feet), and/or make sure there's a clear
line of sight between the unit and the Bluetooth device.
2. If the connection is lost, the connection will need to be reestablished. Fo llow the directions under
"Reconnecting Your Device".