Charging; Understanding The Led Status Indicators - Altec Lansing The Jacket IMW455 Owner's Manual

Charger Your Speaker
1. Connect one end of the included AC power adapter cable to the iMW455 DC input jack. Then plug the other
end of the AC adapter into a suitable power outlet to recharge your speaker's internal rechargeable battery.
NOTE: The internal battery of your speaker takes approximately four hours to charge when completely
drained.
2. When charging, a red LED light will illuminate to indicate that the unit is charging. The red light will turn off
when your unit is fully charged.

Understanding the LED Status Indicators

Power and Bluetooth Indicator Light
Blinking Blue LED = Bluetooth not connected. (Ready to pair.)
Solid Blue LED = Bluetooth connected.
Charging Indicator Lights
Solid Red LED = Charging
Red LED OFF = Charged Full.