Generic Error Codes (Raidscan, Raidqry, Raidar, Horcctl) - Hitachi VSP F1500 User And Reference Manual

Category
Resource
(Unrecoverable)

Generic error codes (raidscan, raidqry, raidar, horcctl)

The following table lists the generic error codes returned by the following
commands:
•
raidscan
•
raidqry
•
raidar
•
horcctl
In this table, "Unrecoverable" indicates errors that cannot be recovered by
reexecuting the command, and "Recoverable" indicates errors that can be
recovered by reexecuting the command.
Table 9-4 Generic error codes (raidscan, raidqry, raidar, horcctl)
Category
Syntax for Argument
(Unrecoverable)
Configuration
(Unrecoverable)
Command I/O to RAID
(Recoverable)
9-20
Error code
EX_ENOMEM
Error code
EX_REQARG Required Arg list
EX_INVARG Invalid argument
EX_INVNAM Invalid name of option
EX_UNWOPT Unknown option
EX_UNWCOD Unknown function code
EX_UNWCMD Unknown command
EX_ERANGE Result too large
EX_ENAMLG File name too long
EX_INVRCD Invalid return code
EX_ENLDEV No such LDEV within the RAID
EX_ENOUNT No such RAID unit
EX_INVMUN Invalid mu# with HORC or HOMRCF
EX_ERPERM Permission denied with the RAID
EX_ENOSUP Microcode not supported
EX_ESPERM Permission denied with the SLPR
EX_CMDIOE Control command I/O error
EX_OPTINV A specified option is invalid
EX_INVMOD Invalid RAID command mode
Troubleshooting
Command Control Interface User and Reference Guide
Error message
Not enough core
Error message
Retur
n
Value
245
Value
254
253
249
252
238
230
244
243
226
227
219
220
211
210
207
237
248
241