Truecopy/Shadowimage/Universal Replicator Pair Status - Hitachi VSP F1500 User And Reference Manual

P-VOL and S-VOL can be in different storage systems. TrueCopy provides
synchronous and asynchronous copy modes. TrueCopy Async can only be
used between separate storage systems (not within one storage system). For
details on TrueCopy specifications, volumes and operations, please see the
Hitachi TrueCopy® User Guide for your storage system.
ShadowImage commands allow you to create volume pairs consisting of one
P-VOL and up to nine S-VOLs using the ShadowImage cascade function.
ShadowImage pairs are contained within the same storage system and are
maintained using asynchronous update copy operations. For details on
ShadowImage specifications volumes and operations, please see the Hitachi
ShadowImage® User Guide for your storage system.
Each volume pair that you want to create must be registered in the CCI
configuration file. ShadowImage volume pairs must include a MU (mirrored
unit) number assigned to the S-VOL. The MU number indicates that the pair
is a ShadowImage pair and not a TrueCopy pair. Once the correspondence
between the paired logical volumes has been defined in the HORCM_DEV
section of the configuration file, you can use the configuration file to group
the paired volumes into volume groups that can be managed by the host
operating system's LVM (logical volume manager).
The host's LVM allows you to manage the TrueCopy/ShadowImage volumes
as individual volumes or by volume group. TrueCopy/ShadowImage
commands can specify individual logical volumes or group names. For LUSE
volumes, you must enter commands for each volume (LDEV) within the
expanded LU. If you define volume groups and you want to issue commands
to those volume groups, you must register the volume groups in the
configuration file. For further information about the server LVM, see the user
documentation for your corresponding operating system.

TrueCopy/ShadowImage/Universal Replicator pair status

Each TrueCopy pair consists of one P-VOL and one S-VOL, and each
ShadowImage pair consists of one P-VOL and up to nine S-VOLs when the
cascade function is used.
on page 6-19
status terms.
and describes the Universal Replicator pair status terms. The P-VOL controls
the pair status for the primary and secondary volumes. The major pair
statuses are SMPL, PAIR, PSUS/PSUE, and COPY/RCPY. Read and write
requests from the host are accepted or rejected depending on the pair status
of the volume.
The pair status can change when a CCI command is executed. The validity of
the specified operation is checked according to the status of the volume
(primary volume).
• Table 6-4 Pair status versus TrueCopy/Universal Replicator commands on
page 6-21
Universal Replicator command acceptance.
6-18
Table 6-2 TrueCopy and ShadowImage pair status
lists and describes the TrueCopy and ShadowImage pair
Table 6-3 Universal Replicator pair status on page 6-20
shows the relationship between pair status and TrueCopy/
Data replication operations with CCI
Command Control Interface User and Reference Guide
lists