Copy Group Function - Hitachi VSP F1500 User And Reference Manual

• Use Cases
The following shows use cases that can be deleted an LDEV from a device
group.
¢
• Deleting a device group configured of a simplex volume and a paired
volume and not associated with a copy group.
• Deleting a device group configured of simplex volumes and associated
with a copy group.
• Deleting a device group configured of paired volumes and associated with
a copy group.

Copy group function

Defining a copy group by specifying two device groups: one device group
from primary side and one device group from secondary side, whether they
are inside or outside the storage system. A copy group cannot be defined by
specifying more than one device group from just one side of primary or
secondary.
When a copy group is created, which device group is primary and which is
secondary cannot be specified. Therefore, it is specified at the time of actual
Deleting a device group configured of simplex volumes and not
associated with a copy group.
CCI functions
Command Control Interface User and Reference Guide
3-43