Lucent Technologies MAX 6000 Network Configuration Manual page 300

Configuring X.25
Setting up X.25 PAD sessions
Table 6-2. X.3 parameters (continued)
Parameter
11
(continued)
12
13
14
15
16
17
18
19
6-16
Description Possible values
Terminal-server The following values are dependent on the
access speed PAD type:
4—600 bps
3—1200 bps
7—1800 bps
11—75 bps from, 1200 bps to DTE-C.
12—2400 bps
13—4800 bps
14—9600 bps
15—19200 bps
16—48000 bps
17—56000 bps
18—64000 bps
Flow control of the 0—Not operational
PAD by the 1—Use X-ON and X-OFF (DC1 and DC3 of
start-stop mode International Alphabet #5)
DTE
Linefeed insertion 0—Option not selected
after carriage 1—Linefeed insertion after a carriage return in
return data the PAD sends to DTE-C
2—Linefeed insertion after a carriage return in
data the PAD receives from DTE-C
4—Linefeed insertion after echo of each
carriage return to DTE-C
Linefeed padding 0—No padding
1–7—Number of padding characters inserted
after the linefeed
Editing 0—No editing in data transfer
1—Editing in data transfer
Character delete 0–127 (a character from International
Alphabet #5)
Line delete 0–127 (a character from International
Alphabet #5)
Line display 0–127 (a character from International
Alphabet #5)
Editing PAD 0—No editing PAD service signals
service signals 1—Editing PAD service signals
MAX 6000/3000 Network Configuration Guide