Lucent Technologies MAX 6000 Network Configuration Manual page 270

Configuring Frame Relay
Concentrating incoming calls onto Frame Relay
The following set of parameters configures FR Direct Connection profiles for the incoming
calls:
Ethernet
Connections
Ethernet
Connections
Following are comparable RADIUS profiles:
caller-1 Password="caller1*3", User-Service=Framed-User
caller-2 Password="caller2!!8", User-Service=Framed-User
5-24 Preliminary January 4, 2001
caller-1
Station=caller-1
Active=Yes
Encaps=PPP
Encaps options
Recv PW=caller1*3
IP options
LAN Adrs=10.5.6.7/32
Session options
FR Direct=Yes
FR Prof=fr-dte
FR Dlci=72
caller-2
Station=caller-2
Active=Yes
Encaps=PPP
Route IP=Yes
Encaps options
Recv PW=caller2!!8
IP options
LAN Adrs=10.5.6.7/32
Session options
FR Direct=Yes
FR Prof=fr-dte
FR Dlci=72
Framed-Protocol=PPP,
Framed-Address=10.5.6.7,
Framed-Netmask=255.255.255.255
Ascend-FR-Direct=FR-Direct-Yes,
Ascend-FR-Direct-Profile="fr-dte",
Ascend-FR-Direct-DLCI=72
Framed-Protocol=PPP,
Framed-Address=10.7.8.9,
Framed-Netmask=255.255.255.255
Ascend-FR-Direct=FR-Direct-Yes,
Ascend-FR-Direct-Profile="fr-dte",
Ascend-FR-Direct-DLCI=72
MAX 6000/3000 Network Configuration Guide