Alcatel-Lucent 7210 SAS T Configuration Manual page 311

The no form of the command removes the previously entered etype field as the match criteria.
Default no etype
Parameters
ethernet-type — The Ethernet type II frame Ethertype value to be used as a match criterion expressed
src-mac
Syntax src-mac ieee-address [ieee-address-mask]
no src-mac
Context config>filter>mac-filter>entry
Description Configures a source MAC address or range to be used as a MAC filter match criterion.
The no form of the command removes the source mac as the match criteria.
Default no src-mac
Parameters
ieee-address — Enter the 48-bit IEEE mac address to be used as a match criterion.
ieee-address-mask — This 48-bit mask can be configured using:
7210 SAS M, T, X, R6, R12, Mxp OS Router Configuration Guide
in hexadecimal.
Values
0x0600 — 0xFFFF
Values HH:HH:HH:HH:HH:HH or HH-HH-HH-HH-HH-HH where H is a hexadecimal
digit
Format Style
Decimal
Hexadecimal
Binary
To configure so that all packets with a source MAC OUI value of 00-03-FA are subject to a
match condition then the entry should be specified as: 003FA000000 0xFFFFFF000000
Default 0xFFFFFFFFFFFF (exact match)
Values
0x00000000000000 — 0xFFFFFFFFFFFF
Format Syntax
DDDDDDDDDDDDDD
0xHHHHHHHHHHHH
0bBBBBBBB...B
Filter Policies
Example
281474959933440
0x0FFFFF000000
0b11110000...B
Page 311