Basic Configuration - Alcatel-Lucent 7210 SAS T Configuration Manual

Basic Configuration

Note: Refer to each specific chapter for specific routing protocol information and command
syntax to configure protocols such as OSPF and BGP.
The most basic router configuration must have the following:
•
•
The following example displays a router configuration:
A:ALA-A> config# info
. . .
#------------------------------------------
# Router Configuration
#------------------------------------------
router
router-id 10.10.10.103
...
exit
isis
exit
...
#------------------------------------------
A:ALA-A> config#
7210 SAS M, T, X, R6, R12, Mxp OS Router Configuration Guide
System name
System address
interface "system"
address 10.10.10.103/32
exit
interface "to-104"
address 10.0.0.103/24
port 1/1/1
exit
exit
autonomous-system 12345
IP Router Configuration
Page 41