Communication Ports - Siemens RUGGEDCOM RSG2288 Installation Manual

Chapter 1
Introduction
• Transparent clock operation for high precision on switched networks (1us or better)
• Peer-to-peer path delay measurements
• High precision TCXO (Temperature Compensated Oscillator)
• Supports master, slave and transparent clock modes
• Support for IRIG-B input and output
Rated for Reliability in Harsh Environments
• Immunity to EMI and heavy electrical surges
• Zero-Packet-Loss™ technology
• -40 to 85 °C (-40 to 185 °F) operating temperature (no fans)
• Conformal coated printed circuit boards (optional)
• 18 AWG galvanized steel enclosure
• Hazardous Location Certification: Class 1 Division 2
Universal Power Supply Options
• Fully integrated, dual-redundant (optional) power supplies
• Universal high-voltage range: 88-300 VDC or 85-264 VAC
• Popular low voltage ranges: 24 VDC (10-36 VDC), 48 VDC (36-72 VDC)
• Screw or pluggable terminal blocks for reliable, maintenance-free connections
• CSA/UL 60950-1 safety approved to 85 °C (185 °F)
Section 1.2
Description
The RUGGEDCOM RSG2288 features various ports, controls and indicator LEDs on the display panel for
connecting, configuring and troubleshooting the device. The display panel can be located on the rear, front or top
of the device, depending on the mounting configuration.
Figure 1: RUGGEDCOM RSG2288
1. Fiber or Copper Ethernet Ports 2. Copper Ethernet Port 3. BNC Ports 4. Port Status Indicator LEDs 5. Mode Button 6. RS-232 Serial
Console Port (RJ45) 7. Display Mode Indicator LEDs 8. Alarm Indicator LED 9. Power Module Indicator LEDs

Communication Ports

2
1
Ports for communicating with other devices or accessing the RUGGEDCOM ROS operating
system are described in Chapter 3, Communication
2 7
3 4 5
Ports.
RUGGEDCOM RSG2288
Installation Guide
8
9
6
Description