Actuator Keys And Actuator Lights; Locking/Unlocking The Vsi; Off-Board Charger/Programming Socket; Motor Connectors - Pride Mobility JAZZY 1103 ULTRA Owner's Manual

Pride mobility wheelchair user manual
Hide thumbs Also See for JAZZY 1103 ULTRA:
Table of Contents

Advertisement

Actuator Keys and Actuator Lights

Actuator keys and actuator lights are used for optional equipment such as power elevating seats or power elevating leg
rests. For specific operation of the actuator keys and actuator lights, contact your authorized Pride Provider.
Horn Key
The horn key activates the horn.

Locking/Unlocking the VSI

The VSI has a feature that enables you to lock your power chair to prevent unauthorized use.
To lock the VSI:
1. With the VSI switched on, press and hold the on/off key. After 1 second, the VSI should beep.
2. Release the on/off key.
3. Push the joystick to the full forward position until the VSI beeps.
4. Pull the joystick to the full rearward position until the VSI beeps.
5. Release the joystick. There should be a long beep.
6. The VSI is now locked.
To unlock the VSI:
1. Press the on/off key and power on the VSI. The maximum speed/profile indicator should ripple side to side.
2. Push the joystick to the full forward position until the VSI beeps.
3. Pull the joystick to the full rearward position until the VSI beeps.
4. Release the joystick. There should be a long beep.
5. The VSI is now unlocked.
NOTE: If the above procedure fails to either lock or unlock the VSI, contact your authorized Pride Provider.

Off-board Charger/Programming Socket

The off-board charger/programming socket is located on the front of the VSI. If you use an off-board charger, the charger
current should not exceed 8 amps. Contact your authorized Pride Provider for more information.
WARNING! Only chargers with Neutrik NC3MX plugs should be connected to the off-board charger/
programming socket. See your authorized Pride Provider for more information.
NOTE: The socket may also be used for reprogramming the VSI. Contact your authorized Pride Provider for
more information.

Motor Connectors

This connects the VSI to the power chair's motors and motor brakes.
Battery Connector
This connects the VSI to the power chair's batteries.
Jazzy 1103 Ultra
V I I .
O P E R A T I O N
www.pridemobility.com
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents