Panasonic KX-TDA600 Installation Manual page 92

2.2 Installation of the Hybrid IP-PBX
2.
Check that the shelves are standing exactly vertically. If the shelves are leaning slightly to one side,
move the base stands to adjust the position. (Since the base stands are attached loosely to the floor, it
should be possible to adjust the position of the shelves.)
Then, tighten the screws connecting the base stands to the floor.
Base Stand
Floor
Installation of the first 2 shelves is complete. Next, install Expansion Shelves 2 and 3 next to the Basic Shelf
and Expansion Shelf 1.
92 Installation Manual
95 mm
382 mm
WWW.ERTEBATGROUP.COM
Wall
WWW.ERTEBATGROUP.COM