Information About The Main Processing Card - Panasonic KX-TDA600 Installation Manual

WWW.ERTEBATGROUP.COM
2.3

Information about the Main Processing Card

2.3.1 EMPR Card
Function
Contains the main processor for all processes, basic shelf main protocol, time switch (TSW) control,
detection of system clock alarm, basic shelf power down alarm, and watchdog timer overflow. An EMEC
card and an RMT card can be mounted on the EMPR card (refer to "2.3.2 EMEC Card (KX-TDA6105)" and
"2.3.3 RMT Card (KX-TDA0196)").
LEDs
SD Memory Card
Slot Cover
Reset Button
System Initialise
Switch
USB
BGM/MOH
Pager
Notes
• For details about connecting peripherals, refer to "2.13.1 Connection of Peripherals".
• For details about System Initialise Switch, refer to "2.15.1 Starting the Hybrid IP-PBX".
• For details about Reset Button, refer to "4.1.4 Using the Reset Button".
CAUTION
• Use only the SD Memory Card included with the Hybrid IP-PBX, or a Panasonic optional upgrade
SD Memory Card.
• The SD Memory Card contains software for all the processes of the Hybrid IP-PBX and all the
customer data. The SD Memory Card must be inserted before startup.
• Do not remove the SD Memory Card while power is supplied to the Hybrid IP-PBX. Doing so may
cause the Hybrid IP-PBX to fail to start when you try to restart the system.
2
SD
Memory
Card
4
WWW.ERTEBATGROUP.COM
2.3 Information about the Main Processing Card
SD
CARD
3
SD
CARD
SD
CARD
5
Installation Manual 123