Panasonic KX-TDA600 Installation Manual page 76

2.2 Installation of the Hybrid IP-PBX
Fixing to the Wall
1.
Install 4 anchor plugs in the wall, using the wall brackets as a template. Fix the wall brackets to the wall
with 4 screws (A).
CAUTION
• Drive mounting screws into the wall. Be careful to avoid touching any metal laths, wire laths or
metal plates in the wall.
• When installing anchor plugs in the wall, be careful not to damage or dirty the shelves.
Washer
Screw (A)
76 Installation Manual
Wall Bracket (Left)
413 mm
WWW.ERTEBATGROUP.COM
Wall Bracket (Right)
Anchor Plug
W a ll
Wall Bracket
WWW.ERTEBATGROUP.COM
Hammer
Anchor Plug
30 mm
Screw (A)
Washer
8 mm