E1 Card (Kx-Tda0188) - Panasonic KX-TDA600 Installation Manual

2.6 Information about the Trunk Cards
2.6.7

E1 Card (KX-TDA0188)

Function
1-port E1 trunk card. ITU-T standard compliant.
LEDs
RJ45
To NT1/Extension
To NT1/Extension
For BNC
Accessories and User-supplied Items
Accessories (included): Ferrite core × 1
User-supplied (not included): RJ45 or BNC connector
Notes
• In some countries/areas, this optional service card must not be connected to the Public Switched
Telephone Network.
• When connecting this optional service card to the trunk, connect through NT1; do not connect to
the trunk directly.
• Use only 1 type of connector (RJ45 or BNC) for connection; RJ45 and BNC cannot be used
simultaneously.
• When connecting the RJ45 connector, attach the included ferrite core. Refer to "2.2.15 Attaching
a Ferrite Core".
• This optional service card can be used for either trunk or extension connection, by setting the A/B
switch or using the connector with appropriate pin assignments.
• To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "2.15.1 Starting the
Hybrid IP-PBX".
CAUTION
E1 ports are SELV ports and should only be connected to SELV services.
142 Installation Manual
For RJ45
120Ω 120Ω
OR
75Ω 75Ω
WWW.ERTEBATGROUP.COM
BNC (TX) outer conductor
J 3 0 8
OR
3
1 2
For Frame
Ground Open
BNC (TX)
BNC (RX)
OR
BNC (RX) outer conductor
WWW.ERTEBATGROUP.COM
J 3 0 8
3
1 2
For Frame
Ground Short