Panasonic KX-TDA600 Installation Manual page 244

2.11 Connection of 2.4 GHz Portable Stations
Registering the PS
The PS must be registered to the Hybrid IP-PBX before it can be used. Programming of both the PS and
Hybrid IP-PBX is required. A PT with multiline display (e.g., KX-T7636 6-line display) is required to perform
the Hybrid IP-PBX system programming.
Note
For details about system programming using a PT, refer to "2.3.2 PT Programming" in the Feature
Guide, and "2.1 PT Programming" in the PT Programming Manual.
Entering the System Programming Mode
PT (Administrator Level)
PROGRAM/
PAUSE
PS (Using the KX-TD7680)
Press POWER
for 2 seconds.
If required
System Lock Password
PS (Using the KX-TD7690)
Press POWER
for 2 seconds.
If required
System Lock Password
Note
means default value throughout this section.
244 Installation Manual
System Password for Administrator—
#
for PT Programming
FUNC
Select
"PS PROGRAM".
4 digits
MENU
Select
S1
"PS PROGRAM".
ENTR
4 digits S1
WWW.ERTEBATGROUP.COM
= 1234
Select
"SYSTEM SET".
System Setting Menu
SEL
Select
S1
"SYSTEM SETTING".
System Setting Menu
WWW.ERTEBATGROUP.COM
Programming No.
3 digits
SEL
S1