Installing/Removing The Optional Service Cards - Panasonic KX-TDA600 Installation Manual

2.2 Installation of the Hybrid IP-PBX

2.2.12 Installing/Removing the Optional Service Cards

CAUTION
To protect the back board from static electricity, do not touch parts on the back board in the main unit
and on the optional service cards. To discharge static electricity, touch ground or wear an earthing strap.
Note
The optional service cards can be installed or removed while the DC power is supplied. However, when
installing or removing the EMPR card, BUS-M card or BUS-S card, the DC power supply must be turned
off.
Installing Optional Service Cards
1.
Insert the card along the guide rails.
108 Installation Manual
Guide Rail
WWW.ERTEBATGROUP.COM
WWW.ERTEBATGROUP.COM